I am happy to share with you another free PDF printable sewing pattern for 18-inch dolls---Swirl skirt with elasticated waist band.
I have posted lots of free PDF printable sewing patterns on this page on my blog. Browse through this page to find the patterns you are looking for. You can download and use them to make your own clothes.
You can also click the Free Sewing Patterns Page at the top of this blog page (under the blog title) to find more free sewing patterns.
Click the links below to browse through all the pattern drafting and sewing tutorials on my blog.
Seam allowances are included in the pattern and have been mentioned in the pattern page.
Download link:
Click here to download the pattern.
How to print?
Print the page on an A4 paper. Make sure you have set page sizing to "Actual size" before you print the pattern.
You can measure the 1 inch x 1 inch square in the pattern page to check whether the page has printed correctly.
Waistband:
For the waistband, cut a 20-inch-long, 2-inch-wide piece of fabric.
How to sew?
Step 1: Cut 8 swirl pieces using the pattern.
Step 2: With right sides together, join the inner edge of the first swirl piece with the outer edge of the second swirl piece leaving a 1/4-inch seam allowance. Next, join the inner edge of the second swirl piece with the outer edge of the third spiral piece. Continue this with the other pieces, until you finish attaching the outer edge of the eighth swirl piece. Lastly, join the inner edge of the eighth swirl piece with the outer edge of first swirl piece.
Step 3: Finish the hemline by attaching bias tape or by serging.
Step 4: With right sides facing, attach the bottom edge of the waistband to the skirt's top edge at the center back using a 1/4 inch seam allowance. Start by leaving a trail of 1 inch of the waistband at one end and sew around the skirt. And once you are back at the starting point, match the ends pin them together. Cut the trail of fabric from both ends of the waistband leaving only 1/4 inch for seam allowance on both ends, and now join the ends together.
Step 5: Fold down the top edge of the waist band by 1/4 inch. Next, fold the waistband in half, and sew over the folded edge leaving a small gap to feed the elastic in. Insert a 0.5-inch-wide, 10-inches-long elastic through the casing, and overlap the ends of the elastic by 0.5 inch and sew them together. Sew the gap in the casing closed. That's it! You have made a beautiful swirl skirt for your doll!
If you would like to sew a spiral skirt for your doll, click here to download the free spiral skirt PDF pattern.
Happy sewing!
---Flora
No comments:
Post a Comment