How to Sew Empire Waist Dress with Overlapping Front Bodice

Step 1---Arranging the pattern pieces

Using the patterns for the dress's front, back, and sleeves, cut and arrange your pattern pieces.

You can see how to draft the front here.

Dress back draft is shown here.

Sleeve draft is discussed here.

Front bodice:

Two main fabric pieces and two lining fabric pieces.

Back bodice:

Two main fabric pieces, two lining fabric pieces. (The button and buttonhole extensions in the below image are of same size which I changed later. You can note the difference in the dimensions in image next to the image below.)

Button and buttonhole extensions. I kept the button extension wider than the buttonhole extension. The buttonhole extension will overlap the button extension.

Front skirt:

Back skirt:

Sleeves:

Sleeve bands:

Bow, bow center, and bow ribbons:

For bow and bow ribbons, cut two pieces of fabric. Bow center is made with a single piece of fabric.

Step 2---Making the bodice and attaching the sleeves

With right sides facing, join the front and back bodice lining fabric pieces at the shoulders. For clarity, I have labeled the joined lining fabric pieces as A and B.

Next, with right sides facing, join the front and back bodice main fabric pieces at the shoulders. For clarity, I have labeled the joined main fabric pieces as C and D.

With right sides facing, pin together (only at the neckline) each set of lining fabric and main fabric bodice pieces (that is, A with C and B with D). In the image below, the lining fabric piece is on top and the main fabric piece is underneath.

Join the main fabric and lining fabric pieces together at the neckline, removing the pins as you join.

Clip the neckline edge as shown in the photograph below.

Turn the pieces inside out and press.

(Please excuse me for the brown stain you see on the bodice piece on the right side. It was made by my little artist. I should have been careful to keep the dress out of her reach. A lesson learned!)

Attaching the button and buttonhole extensions to the back bodice pieces:

We are going to attach the button extension to the left-side piece of the back bodice, and the buttonhole extension to the right-side piece of the back bodice. (You can also do this step before joining the lining and main bodice pieces.)

First we will attach the button extension. Pin the button extension with the lining side of the back bodice left piece at the center back. Also pin the main and lining fabric pieces at the waist seam and side seam (pointed by the arrows in the photo) to prevent the two pieces slipping away from each other.

Sew the button extension in place with a 0.25 seam allowance. You can notice in the image below that the button extension's length (according to the draft) is more than the center back length. We will trim this excess off in the next step.

You can trim off  the excess at the top according to the shape of the neckline not straight as shown here. I trimmed it later.

This will look like this on the main side.

Fold the button extension first by 0.25 inch and press, and then by 1 inch to cover the seam and pin.

 

I could not keep the fold as neat as I wanted it to be, because the fabric I used was too slippery and the pins could not hold the fabric in place (After a long try, I folded it somehow.)

Sew the edge of the fold in place. Your button extension will now extend 1 inch from the center back of the left piece. (You can also attach the button extension to the main side and fold it down the lining side.)

Now, we will attach the buttonhole extension to the center back of the right back piece.

Fold 0.25 inch first and fold again fully and sew the fold in place.

This will look like this on the main side.

 

We have finished the back bodice. This is the finished look.

Next, we will attach the sleeves.

Sew long stitches (basting stitches) 0.25 inch up from the hemline of the sleeve by setting the stitch length to the longest in your sewing machine (It is 4 in my machine). Leave 3 inches of thread on both sides.

Pull the threads to gather the sleeve hemline such that the length of the hemline equals the length of the sleeve band. With right sides facing, pin the sleeve hemline to the sleeve band with a 0.25 seam and then sew them together.

Pick out the gathering stitches (i.e., the basting stitches) at this step, and then fold the sleeve band to the wrong side and hem. Repeat the same for the other sleeve.

I kept the sleeves plain at the sleeve cap (that is, I did not gather the sleeve at the top edge). The sleeves have a puffed effect only at the hemline. The sleeve cap can be usually 1 to 1.5 inches more than the armhole. This extra measure is called sleeve cap ease. I read in some books that for puffed sleeves, cap ease can be reduced to 0.5 inch. For this, you need to slightly trim the cap in the basic sleeve draft before you will use it to draft the puffed sleeve or after you have drafted the puffed sleeve. I didn't do this, but it might have been easier to fit in the sleeve to the armhole if I had done it.

To even out the sleeve cap ease, or to set the sleeve into the armhole, sew two rows of long stitches close to the edge of the sleeve cap between the front and back notches and even out the fabric at the sleeve cap by lightly pulling the loose threads on both sides. Make sure you don't create gathers. The extra fabric should be eased into the cap evenly. 

With right sides facing, pin the sleeve to the armhole of the bodice.

 

Sew the sleeve in place.

 

Repeat the same for the other sleeve.

 

Sew the darts and your bodice is ready now.

Step 3---Sewing darts in the skirts

Sew the darts in the front and back skirts.

Step 4---Joining the bodices with the skirts

Before this step, pin the back bodice pieces at the bottom such that the buttonhole extension overlaps the button extension.

With right sides facing, join the back bodice and the back skirt on the wrong side at the empire line.

This will look like this on the right side.

 

With right sides facing, join the front bodice and the front skirt on the wrong side at the empire line. Before doing this, pin the front bodice pieces together at the bottom such that the right-side piece overlaps the left-side piece. You can see this in the previous image.

This will look like this on the right side.

Step 5---Joining the sides

Join the sides and hem the bottom of the dress. Your dress is almost done.

 

Step 6---Attaching the bow and ribbons

Now, you will need to attach the bow and ribbons. If you like the plain look of the dress, you can skip out this step.

With right sides facing, join the two bow pieces with a 0.25 inch seam on all the sides leaving a little opening at the top to turn the bow inside out. I have indicated the opening in the image below.

Turn the bow inside out through the opening and whip stitch to close the opening.

With right sides facing join the two ribbon pieces with a 0.25 inch seam on all the sides leaving a little opening at the top to turn the bow inside out. I have indicated the opening in the image below.

Turn the bow inside out through the opening and whip stitch to close the opening.

Take the rectangular piece for the bow center. Make 0.25 inch folds breadthwise.

Then make 0.50 inch folds lengthwise.

Fold again and whip stitch to join the edges.

Bring the seam line to the center and press.

Arrange the bow and ribbon and wrap the bow center piece around the center as shown in the photo below.  Whip stitch to join the raw edges of the bow center piece. Do not cut the thread off, you can use it to attach the bow to the dress. I attached the bow to the dress where the front bodice overlap ends. There are also other methods to make the bow and ribbon. I will share them with you in my future projects.

Fix buttons and sew buttonholes, respectively on the button and buttonhole extensions in the back bodice, and your empire waist dress is ready to wear.

Some action shots:

I hope you enjoyed this tutorial. Please let me know your valuable comments, ideas, and suggestions.

I have linked this to the Sunday show off link party on Twigg Studios, the Sew Tuesday link party on Creative Itch, and the link party on Shwin&Shwin.

You can find lots of free PDF printable sewing patterns on this page on my blog. You can download and use them to create your own clothes.

You can also click the Free Sewing Patterns Page at the top of this blog page (under the blog title) to find more free sewing patterns.

Click the below links to browse through all the pattern drafting and sewing tutorials on my blog.

pattern drafting tutorials 

sewing tutorials  

Pattern Draft---Empire Waist Dress Sleeves (Puffed Sleeves) and Bow

I apologize for the delay in posting the draft for the sleeves. Here the tutorial continues:

Step 13: The sleeve I used in this dress is a set-in puffed sleeve with fullness only at the sleeve hemline (no fullness at the sleeve cap, i.e., the top edge of the sleeve.). You may need a basic sleeve pattern to understand the drafting of puffed sleeve.

Basic sleeve draft:

A to E = E to B = 1/8 chest + 2.5 inches

Draw a vertical line from E which meets the line CD at point F such that C to F = F to D =  1/8 chest + 2.5 inches

A to H = B to G = 1/8 chest

S to F = F to T = half sleeve round at hemline + 0.25 to 0.50 inch ease

E to I = E to M = 1 inch

Sleeve front curve:

Join G and I.

G to K = 1.5 inches

Join K and I.

J is the midpoint of GI. Mark L 0.5 inch from J.

Shape the front armhole GLE as shown in the figure.

Sleeve back curve:

Join H and M.

N is the midpoint of HM.

P is the midpoint of HN.

O is the midpoint of NM.

Mark Q 0.5 inch from N and mark R 0.5 inch from O.

Shape the back armhole HPQRM as shown in the figure.

Your basic sleeve pattern will look like this once cut out:

Add seam allowances on all the sides---0.25 inch at the sleeve cap, 0.5 inch on the sides, and 1.5 inches at the hemline to fold and hem.

Pattern draft for puffed sleeve with fullness at hemline:

Make the following changes to the basic sleeve draft without seam allowances.

Extend the center line from F. Mark X 2 inches from F.

Mark U and V 0.75 inch from S and T, respectively.

Draw lines from X to both sides such that they pass through U and V. Refer to the figure. 


Mark Y and Z 1 inch (you can increase this measure according to the fullness you prefer) from U and V, respectively.

Draw lines from H and G that pass through Y and Z, respectively.

Measure the distance from H to U as well as from G to V.

Use this measure to mark I and J.

Connect IXJ using a curved line.

This is how your puffed sleeve will look like:

Add seam allowances on all the sides---0.25 inch at the sleeve cap, 0.5 inch on the sides, and 0.25 inch at the hemline if you attach a sleeve band, 1 inch otherwise to fold and hem.

There is also another method called the "slash and spread method" to draft a puffed sleeve, which I will discuss in a later post.

Sleeve band:

A to B = C to D = Sleeve round + 0.25 to 0.5 inch ease + 1 inch for seam allowance on the sides.

A to C = B to D = width of the band = 1.5 inches (with 0.25-inch seam and hem allowances included. You can increase or decrease the width of the band, but it should not be less than 0.75 inch.)

Draft for the Bow at the Front:

Ribbon:

Bow center piece:

I have posted lots of free PDF printable sewing patterns on this page on my blog. Browse through this page to find the patterns you are looking for. You can download and use them to make your own clothes.

You can also click the Free Sewing Patterns Page at the top of this blog page (under the blog title) to find more free sewing patterns.

Click the below links to browse through all the pattern drafting and sewing tutorials on my blog.

pattern drafting tutorials 

sewing tutorials 

Happy Sewing!

---Flora

Pattern Draft---Empire Waist Dress Back

Step 8:


The pattern draft for the front part of the dress is over. Now we will draft the pattern for the back.

All the points are marked as in the front draft except a few points. A to F is the back neck depth which is as per your preference. I have marked it 1 inch.

Mark M 0.5 inch from L. Mark N 1 inch from I. Join G-M-N-I to shape the back armhole. Other measurements are same including the dart. Draw the empire line as you did for the front side.

Please include the dart intake as per your requirement. The dart intake I kept in this dress was 0.50 inch (this will be 0.75 inch or more for females above 14 years). 






Step 9:

Cut through the empire line to get the back bodice and skirt pieces.


Back Bodice:

The only change to the back bodice is to mark the new dart base point X. 





Step 10:

Unfold the back bodice draft and cut through the center back to separate right and left back pieces. Draw the seam allowances. It is 0.5 inch on all the sides except on the neckline and for joining the button and buttonhole closures, for which a 0.25 inch seam allowance is required. Extend the dart legs as shown in the figure.

I joined the button and buttonhole closures separately. They are drafted as follows:

The left one is for button closure.

A to B = C to D = Center back length + 1.5 inch (1 inch for fold at the neckline and 0.5 inch for the seam allowance for joining at the waistline.) 

A to C = B to D = 2.5 inches

The right one is for buttonhole closure.

E to F = G to H = Center back length + 1.5 inch (1 inch for fold at the neckline and 0.5 inch for the seam allowance for joining at the waistline.)

E to G = F to H =  1.5 inches

Step 11:





Back skirt:

Extend the dart legs as you did for the front skirt. Mark X 3/4 inch (can be 1inch for women's size) from Q and draw a curved line connecting B and X.

Step 12:

Add seam allowances---0.5 inch for waist and sides and 1.25 inch for hemline fold. Extend the dart legs upward.

Tomorrow I will show you how to draft the sleeves.

You can see how to draft the front here.

Sleeve draft is discussed here.

I have posted lots of free PDF printable sewing patterns on this page on my blog. Browse through this page to find the patterns you are looking for. You can download and use them to make your own clothes.

You can also click the Free Sewing Patterns Page at the top of this blog page (under the blog title) to find more free sewing patterns.

Click the below links to browse through all the pattern drafting and sewing tutorials on my blog.

pattern drafting tutorials 

sewing tutorials 

Happy Sewing!

---Flora